Views: 0 Author: Site Editor Publish Time: 2026-11-21 Origin: Site
The four-digit number on a T-slot profile is its cross-section in millimetres: a 2020 is 20×20 mm, a 4040 is 40×40 mm, and a 4080 is 40×80 mm. Match the profile to four things — the load, the unsupported span, the application, and the slot width your hardware needs. As a rule of thumb: use 20-series for light, compact builds, 40-series (especially 4040) for general machine frames and workstations, and 4080/8080 for long spans and heavy bases. Always confirm the slot width (6, 8 or 10 mm) before ordering T-nuts and bolts.
T-slot aluminum extrusion is a modular framing system made from 6063 (and sometimes 6061) aluminum, with continuous undercut slots that accept T-nuts, bolts, brackets and panels without welding or drilling.
The naming convention is simple. The four-digit code gives the width and height of the cross-section in millimetres:
The first two digits = width in mm.
The last two digits = height in mm.
So a 2020 measures 20×20 mm (a square section), a 2040 measures 20×40 mm (a rectangle twice as tall as it is wide), and a 4080 measures 40×80 mm. The word "series" refers to the face width — the 20-series, 40-series and so on.
This table covers the metric profiles most often specified for industrial frames, guards and workstations.
Profile | Cross-section (mm) | Typical slot width | Typical applications |
|---|---|---|---|
2020 | 20 × 20 | 6 mm | 3D printers, small frames, prototypes, desktop equipment |
2040 | 20 × 40 | 6 mm | Camera sliders, linear motion, directional reinforcement |
3030 | 30 × 30 | 6–8 mm | Medium enclosures, workstation frames, display structures |
4040 | 40 × 40 | 8 mm | Machine guards, workbenches, automation frames, CNC enclosures |
4080 | 40 × 80 | 8 mm | High bending resistance, conveyor supports, long spans |
8080 | 80 × 80 | 8–10 mm | Heavy machinery bases, large automation, structural frames |
Rectangular profiles such as 2040 and 4080 are noticeably stiffer in one direction, which makes them the natural choice for horizontal cross-members and long beams.
Start with the weight the member must carry, including dynamic and vibration loads, and build in a safety margin. Light-duty stands, sensor brackets and compact equipment can use 2020 or 3030. Medium-duty workstations and guards typically use 4040, while heavy machine bases and loaded structures call for 6060, 8080 or larger sections.
A profile that works on a short frame can flex badly over a long unsupported span. As the beam length increases, you need a larger section, the right orientation, or a support in between. Engineers compare the moment of inertia and check deflection against the acceptable limit rather than choosing on load alone. This is exactly where double-width 4080 earns its place.
The intended use points to a clear starting point:
Light / compact: 3D printers, test rigs, display fixtures — 2020.
General industrial: machine guards, assembly benches, conveyor frames — 4040.
Long or stiff members: gantry cross-beams, uprights — 4080.
Heavy / large: robotic cells, machinery bases, big enclosures — 8080 or 45-series.
Profile size and slot width are not the same thing, and the slot is the critical compatibility factor for fasteners. Common metric mappings are:
Slot width | Found on | Typical hardware |
|---|---|---|
6 mm | 15 / 20 series | M3, M4, M5 |
8 mm | 30 / 40 series | M5, M6, M8 |
10 mm | 45 series and larger | M8, M10 |
T-slot hardware is not universally interchangeable. Different manufacturers use slightly different slot geometry, and metric and imperial (inch) systems are separate. When you extend an existing frame, stay with the same system or verify dimensions before ordering.
Buyers often confuse the two because they share the same outside dimensions, but they solve different problems.
T-slot is built for fastening. The T-shaped undercut holds T-nuts and bolts anywhere along the length, making it the standard for stationary or reconfigurable structural frames with a wide accessory ecosystem.
V-slot is built for motion. Its edges are angled (typically about 45°) so a V-wheel can run along them, turning the extrusion into a low-cost linear rail for 3D printers, small CNC machines and plotters.
A pure T-slot profile will not accept V-wheels, and a pure V-slot is less convenient for general fastening. Choose T-slot for structure and V-slot when the member itself must guide a moving carriage.
Before you place an order, confirm the following:
Static and dynamic load, with a safety margin.
Unsupported span and the deflection limit you can accept.
Whether the member is a frame, guard, beam, upright or moving axis.
Slot width (6, 8 or 10 mm) and the matching T-nuts and bolts.
Compatibility with any existing frames or accessories.
Required finish — mill, anodized or powder coated.
Specifying the right size only pays off if your supplier can deliver the profile, accessories and finishes together. At Shanghai Jinlv Aluminum Alloy Product Co., Ltd. (JINLV), we supply standard T-slot aluminum profiles and accessories in 6063-T5/T6 and 6061-T6, alongside custom open-die sections, with in-house CNC machining, anodizing, powder coating and sandblasting under one roof. Frames, guards, workstations and platforms can be supplied against ASTM B221 or EN 755 requirements, with material certificates on request.
Send your drawing and load requirements to sales@al-jin.com or contact us via WhatsApp, and our engineering team will help you confirm the correct series and slot width for your build.
The 4040 is significantly stronger and stiffer because it has a larger 40×40 mm cross-section and an 8 mm slot. Use 2020 for light, compact builds such as 3D printers and small rigs, and 4040 for machine guards, workbenches and automation frames that carry real loads.
A 4040 is the standard choice for most industrial workbenches and assembly stations. For long benches or heavy equipment, use 4080 for the horizontal members to control deflection, and step up to 8080 for the base if the bench carries very heavy machinery.
Measure the slot width, not the outside size. A 6 mm slot takes M3–M5 hardware, an 8 mm slot takes M5–M8, and a 10 mm slot takes M8–M10. Because slot geometry varies between manufacturers, source profiles and hardware from the same supplier or verify the dimensions first.
Not always. Even at the same nominal size, slot geometry and internal cavities can differ, and metric and imperial systems are not interchangeable. If you are extending an existing frame, match the original system or have your supplier confirm compatibility before you order.
For a moving 3D printer axis, V-slot is the common choice because V-wheels run directly on its angled faces. For a stationary frame or enclosure where parts are bolted together and reconfigured, T-slot is stronger and more versatile; precision machines often pair a T-slot frame with separate linear guides.
